Contemporary Bar Stools With Back – Counter height stools are excellent tools for kitchens with breakfast bars or for home bars in living rooms and dining rooms. These stools are not fixed; you can move them to create new seating areas and seating for parties and events. Putting your back on the back of each stool makes the stool more comfortable and supportive, encouraging those who sit on them to make they comfortable and stay longer. You can build stools with backrest to fit any size or height of the worktop. Configurations up to four 2-by-2-by-36-inch posts at their ends, using a wizard to hold the posts instead of a 16-inch square.
Position a 1/2-by-16-by-16-inch joint above the posts is at each corner. Drill a hole down through the top gasket and into each post. Place the top board to the posts with 3-inch screws and consider the support board. Place a 1-by-18-by-18-inch tabletop on the top of the support table to be the stool seat. Drill four holes up through the support plate and into the stool seat. Attach the seat to the contemporary bar stools with back board by screwing 1-inch wood screws up through the backing plate and into the seat. Place two 1-by-2-by-20-inch boards evenly against one edge of the seat board, with one large side flush against the seat.
12 Photos Gallery of: Custom Contemporary Bar Stools With Back
Make the bottom edge of this board which is the backup support board even at the bottom of the seat plate and have the rest of the board extend up 19 inches above the seat. Drill two holes in each of these backing plates and through the seat plate. Place the backing support plates in the seat with 4-inch wood screws in each hole. Place two 1-by-4-by-18-inch boards evenly across the entire front of the contemporary bar stools with back together so that the large side is on these boards and are perpendicular to them. Space the joints evenly on the backing support plates. Drill two holes through each of these cards, which are backed and backed tables.